With the new JUMBO you are always two steps ahead.
The JUMBO is a high-performance loader wagon that delivers maximum output, high efficiency, excellent reliability and the best operator convenience. It guarantees enjoyable work and high yields. The new range brings you safely through the harvesting season and is also ideal for transporting goods of all kinds at other times too.
Neat, safe and convenient
The JUMBO’s wide pick-up combines clean and tidy collection without losses in a single pass with a supremely comfortable ride. It is suspended in the centre and controlled from both ends by a steel cam track. The enormous pick-up width of 2.3 mm according to DIN means that no swath is too wide. Thanks to the extremely high loading performance even swaths intended for a self-propelled harvester are cleanly picked up.
The large working width also makes driving into the swath and cornering easier, which takes the pressure off the driver.
Perfect ground tracking
Regardless of the terrain in which you use your JUMBO, the floating pick-up adapts perfectly to the ground contours and protects the crop against contamination.
Hydraulic adjustable weight alleviation reduces pressure on the ground to approx. 100 kg, allowing the pick-up to float over the ground.
The optional pick-up jockey wheel chassis with floating function features a patented parallel linkage for unique ground tracking.
Power transfer reinvented
The innovative, unique drive concept has been designed for tractors rated from 200 to 500 Hp. This means that the JUMBO can be operated with a wide range of tractors.
The driveline has a double wide-angle PTO shaft without a clutch and is powered by a Powerband. Optimum power transmission to the rotor is ensured by angular/planetary gears in the rotor drive.
The Powerband delivers maximum power transfer in all operating conditions. It ensures smooth running and a damping effect in changing operating conditions. This protects the mechanics and reduces maintenance and wear costs to a minimum.
Special overload protection system
A PTO shaft with an overload protection system is subjected to extreme wear-intensive stress when used in high-performance harvesting equipment. The angle of the PTO shaft during operation produces torsional vibrations which prematurely trigger the overload protection system and negatively impact throughput.
PÖTTINGER therefore decided to remove the overload protection from the PTO shaft and integrate it directly in a fixed position in front of the angular/planetary gearbox.
Thanks to the newly developed drive concept the JUMBO can be continually operated at up to 3000 Nm. The result is optimum protection of all drive components against unnecessary stress and wear-intensive blockages.
Irregular swaths can be picked up with no reduction in speed and no losses, even when cornering. This increases loading efficiency enormously.
The heart of the JUMBO series is robust, powerful and designed for almost unlimited tractor power. The rotor and its innovative driveline provide high throughput, perfect chopping quality and, if required, the highest possible compaction.
Thanks to the wide, edged areas at the 12 or 10 mm tine tips on the 8-row rotor, it takes over the crop actively and reliably from the pick-up, even if the crop is wet and short. The rotor tines are arranged in a helix formation, with a diameter of 850 mm to guide the forage smoothly through the 34 or 25 mm short-chop knife bank. The rotor is mounted directly on the chopping system frame in order to protect the rotor drive as much as possible even under heavy load.
A tine form that has been optimised still further, combined with the largest possible scraper surface in the loading chamber, makes compaction of over 400 kg/m³ possible if required.
Chopped length of 34 mm
With the proven POWERCUT short-chop chopping system, a JUMBO 7000 series is the ideal solution for highest throughputs with low power requirements and the best chopping quality.
The 48 knives are arranged asymmetrically to the rotor tines for clean and tidy chopping action and are individually protected against foreign objects. These enable a chopped length of 34 mm.
The knife bank that swings out to the side and the hydraulic, central knife release at the touch of a button, are standard equipment on the JUMBO and ensure quick handling without the need for tools.
In addition, the fully automatic AUTOCUT knife sharpening system can be added to ensure that the knives remain sharp for a precise cut at all times.
On the JUMBO 7000, TWIN BLADE knives are available as an option instead of single blade knives.
AUTOCUT - fully automatic knife sharpening system
A precise and consistent chop is the basis for the best silage quality. AUTOCUT ensures that you and your customer have chopping quality that remains consistently high all day long.
Only really sharp knives can guarantee optimum chopping quality, lower power consumption and increased output. The AUTOCUT knife sharpening system is a convenient way of sharpening the knives fully automatically on the loader wagon itself. The number of sharpening cycles can easily be preset using the control terminal, depending on the wear on the knife.
You can reduce fuel consumption by up to 15 % by using knives that are always sharp. Maintenance work is reduced by about 45 minutes per day, because automatic sharpening can take place during a break.
Intelligent front panel
The intelligent and automatically controlled front panel enables a unique loading and unloading strategy. Available as standard, its length of 830 mm means it has a particularly generously dimensioned upper forage compression flap. It provides a significant increase in volume of 4.3 m³ for the same length of wagon.
At the design stage, particular attention was paid to ensuring that the operator has a good view inside the loading chamber.
The front panel makes the loader wagon significantly more compact so that manoeuvrability is improved even in small spaces and on narrow tracks.
An additional dynamometer bolt measures the force acting on the front panel during loading. With the combination of all measuring points (loading torque sensor, dynamometer bolt, compression flap sensor), the degree of compaction and the desired filling level can be directly regulated. As a result, the parameters can be perfectly adjusted to your forage collection requirements.
Intelligent loading system
Three predefined modes can be selected for loading. They enable optimum adaptation to different types of crop, the dry matter content and the degree of filling.
- Mode 1: Light load
- Mode 2: Medium compaction
- Mode 3: High compaction
These three modes can also be individually adjusted to suit your requirements.
Active forage compression flap
The active upper forage compression flap is another highlight. It regulates the loading pressure and the filling rate and guarantees the highest quality forage.
The control system offers fast and direct adaptation to changing operating conditions.
Rapid unloading
The JUMBO’s excellent unloading performance makes it an efficient team player in any silage convoy. Its unloading speed of up to 35 m/min prevents vehicles used for rolling having to wait in the clamp.
Efficient unloading
Rapid unloading, a perfect blanket of unloaded material and as little work left to do by the rollers as possible, the JUMBO’s beater driveline makes it possible.
Unloading performance has been increased by a further 33 %. With total power output of 210 kW the beater driveline allows unloading times of less than a minute. This means that JUMBO models with a beater system have an output equal to those with no beaters.
The innovative form of beater rotor with V-twist work the crop evenly and with no power peaks. They reliably loosen even highly compacted forage. This saves energy and results in optimum efficiency with reduced wear.
The beater drive switch integrated into the angular gearbox is activated by the belt tensioner to ensure friction-locked startup. The soft start protects not just the beater driveline elements but also the scraper floor drive and the chains. No power peaks occur and the service life is prolonged.
If the selected feed speed is too high the scraper floor automatically slows down. Should an overload occur, a cam-type clutch protects the beater driveline.
The soft start means that unloading can be paused, enabling the crop to be split as it is unloaded in the clamp.
The evenly spread blanket of forage on the JUMBO facilitates the rollers’ work, thereby guaranteeing efficient compaction and the best silage quality.
Lighting
The lights on the JUMBO have all been switched to LED, ensuring that the lamps have a long service life.
This saves money and reduces maintenance.
The powerful illumination provided by LED lights means you have light where you really need it.
| Loading volume (DIN 11741) | 38 m³ |
|---|---|
| Theoretical chopped length | 34 mm |
| Number of knives max. | 48 pcs |
| Pick-up recording width | 2,3 m |
| Length | 9,35 m |
| Width | 2,99 m |
| Height with 26.5" tyres | 3,89 m |
| Number of scraper floor chains | 4 pcs |
| Scraper floor motor (standard) | 2-speed |
| Track width | 2,05 m |
| Weight of basic version | 11450 kg |
| Chassis | Tandem unit 18 tonnes |
| Permissible laden weight (standard) | 22000 kg |
| Permissible laden weight max. | 24000 kg |
| Loading volume (DIN 11741) | 40 m³ |
|---|---|
| Theoretical chopped length | 34 mm |
| Number of knives max. | 48 pcs |
| Pick-up recording width | 2,3 m |
| Length | 9,35 m |
| Width | 2,99 m |
| Height with 26.5" tyres | 3,89 m |
| Number of scraper floor chains | 4 pcs |
| Scraper floor motor (standard) | 2-speed |
| Track width | 2,05 m |
| Weight of basic version | 11100 kg |
| Chassis | Tandem unit 18 tonnes |
| Permissible laden weight (standard) | 22000 kg |
| Permissible laden weight max. | 24000 kg |
| Loading volume (DIN 11741) | 45 m³ |
|---|---|
| Theoretical chopped length | 34 mm |
| Number of knives max. | 48 pcs |
| Pick-up recording width | 2,3 m |
| Length | 10,66 m |
| Width | 2,99 m |
| Height with 26.5" tyres | 3,89 m |
| Number of scraper floor chains | 4 pcs |
| Scraper floor motor (standard) | 2-speed |
| Track width | 2,05 m |
| Weight of basic version | 12350 kg |
| Chassis | Tandem unit 20 tonnes |
| Permissible laden weight (standard) | 24000 kg |
| Permissible laden weight max. | 31000 kg |
| Loading volume (DIN 11741) | 47 m³ |
|---|---|
| Theoretical chopped length | 34 mm |
| Number of knives max. | 48 pcs |
| Pick-up recording width | 2,3 m |
| Length | 10,66 m |
| Width | 2,99 m |
| Height with 26.5" tyres | 3,89 m |
| Number of scraper floor chains | 4 pcs |
| Scraper floor motor (standard) | 2-speed |
| Track width | 2,05 m |
| Weight of basic version | 12000 kg |
| Chassis | Tandem unit 20 tonnes |
| Permissible laden weight (standard) | 24000 kg |
| Permissible laden weight max. | 31000 kg |
| Loading volume (DIN 11741) | 52 m³ |
|---|---|
| Theoretical chopped length | 34 mm |
| Number of knives max. | 48 pcs |
| Pick-up recording width | 2,3 m |
| Length | 11,98 m |
| Width | 2,99 m |
| Height with 26.5" tyres | 3,89 m |
| Number of scraper floor chains | 4 pcs |
| Scraper floor motor (standard) | 2-speed |
| Track width | 2,05 m |
| Weight of basic version | 14550 kg |
| Chassis | Tridem unit 30 tonnes |
| Permissible laden weight (standard) | 34000 kg |
| Permissible laden weight max. | 34000 kg |
| Loading volume (DIN 11741) | 54 m³ |
|---|---|
| Theoretical chopped length | 34 mm |
| Number of knives max. | 48 pcs |
| Pick-up recording width | 2,3 m |
| Length | 11,98 m |
| Width | 2,99 m |
| Height with 26.5" tyres | 3,89 m |
| Number of scraper floor chains | 4 pcs |
| Scraper floor motor (standard) | 2-speed |
| Track width | 2,05 m |
| Weight of basic version | 14200 kg |
| Chassis | Tridem unit 30 tonnes |
| Permissible laden weight (standard) | 34000 kg |
| Permissible laden weight max. | 34000 kg |
Leaders in Agricultural & Groundcare Machinery
Browse Our Full Range of TAG Assured Tractors
Shop NowLeaders in Agricultural & Groundcare Machinery
Tallis Amos Group supplies agricultural, turf and residential machinery from leading brands including John Deere, backed by knowledgeable local sales advice and dependable aftersales support. With roots going back to 1882, they bring over a century of industry experience to customers across Wales and the West Midlands.
About Us
Pottinger Specialist
TAG is an authorised Pottinger dealer. Our factory-trained technicians service every machine to the highest standard, using genuine Pottinger parts backed by full manufacturer support.
You May Also Like
Browse similar machinery from our range
Get a Quote
Interested in this machine? Fill in the form below and our team will get back to you as soon as possible.
- Free, no-obligation quotes
- Fast, friendly response
- Expert advice from our team
- Serving the West Midlands, Wales & South West
Thank You!
Your enquiry has been sent successfully. We'll be in touch soon.